Skip to content

Why does my hunter x-core sprinkler system run twice?

X-Core – Station Repeats A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time.

Why does my irrigation system keep running? One of the most common reasons for a valve to keep running continuously is the accumulation of debris in the diaphragm, which prevents the valve from closing. This video will teach you how to clean the diaphragm on your valve. The most common reason for a valve to remain on, or weep, is debris.

How do I reset my Hunter X Core irrigation controller? Resetting a Hunter X-Core is easy. To reset the irrigation controller, all you need to do is press the negative, the hand and the program keys at the same time, then use a small tool to press in the small reset button on the side of your controller. A small screwdriver or a pen will do the trick.

Why are my sprinkler is running if I turn my system off? There are two reasons why sprinklers would continue to run with the controller Off or Unplugged: It’s possible your valves were opened manually. Locate your valve box(es) and turn the solenoid(s) clockwise until snug.

How do I reset my hunter sprinkler controller?

How do I reset my Hunter controller?

  1. Unplug the controller’s transformer.
  2. Press and hold down the, and buttons.
  3. Plug the controller’s transformer back in.
  4. Release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.

Why does my hunter x-core sprinkler system run twice? – Related Asked Question

Why does my sprinkler system not shut off?

How do I reset my Hunter controller?

  1. Unplug the controller’s transformer.
  2. Press and hold down the, and buttons.
  3. Plug the controller’s transformer back in.
  4. Release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.

Why won’t my orbit sprinklers turn off?

Every sprinkler system relies on valves to control the flow of water to individual zones. A broken valve can mean water will not shut off automatically. When this happens, try turning the tab or ring on the black solenoid on top of the valve clockwise until the water shuts off.

How do I reset my irrigation system?

How to Reset a Sprinkler System

  1. Turn the control dial to the “off” position.
  2. Press the “next” button to access the clear-memory feature. …
  3. Press and hold the “off” button until the display stops blinking.
  4. Turn the control dial to the “run” position.
  5. Press and hold down the “minus” arrow and “prog” buttons simultaneously.

Where is the reset button on a Hunter thermostat?

Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.

How do you reset Hunter X2?

X2 – Total Reset

  1. Turn the dial to the RUN position. …
  2. Press and hold the program button.
  3. Press and release the RESET button located inside the lower wiring compartment. …
  4. When the display reads the controller station count, (e.g. 14) then DONE, release the PRG button.

Why do all my sprinkler zones come on at once?

Water is coming out of multiple zones at the same time: For the valves to stay open in one zone, while shutting outlets in other zones, there needs to be a minimum amount of water pushed through the valve. For instance, our 4,000 series require 10 gallons per minute (GPM) to operate and our 6,000 series require 15 GPM.

How do you test a hunter solenoid valve?

Water is coming out of multiple zones at the same time: For the valves to stay open in one zone, while shutting outlets in other zones, there needs to be a minimum amount of water pushed through the valve. For instance, our 4,000 series require 10 gallons per minute (GPM) to operate and our 6,000 series require 15 GPM.

How do I find buried sprinkler valves?

The cheapest and easiest way to find buried irrigation valves is often to probe the soil with a thin rod, such as a long screwdriver. Often you can estimate the rough location of the irrigation valve, then find a buried valve box by probing the ground.

How do I know if my sprinkler valve is bad?

Signs of issues in sprinkler valve:

  1. Water not turning Off: If you notice that water is not closing off from the sprinkler, then there seems to be an issue in the diaphragm valve. …
  2. Leaks of water: …
  3. Broken Sprinkler Head. …
  4. Stuck Valve. …
  5. Wiring: …
  6. Irregular Watering:

How do you fix a stuck sprinkler valve?

Signs of issues in sprinkler valve:

  1. Water not turning Off: If you notice that water is not closing off from the sprinkler, then there seems to be an issue in the diaphragm valve. …
  2. Leaks of water: …
  3. Broken Sprinkler Head. …
  4. Stuck Valve. …
  5. Wiring: …
  6. Irregular Watering:

How do I turn off Irritrol valve?

How to Turn Off a Sprinkler Solenoid Valve

  1. Grasp the body of the solenoid firmly and turn it counterclockwise at least a quarter turn. …
  2. Turn the solenoid back the other way to shut off the water supply.

How do I reset my orbit sprinkler timer?

Orbit Sprinkler Timer Instructions

  1. Push the “Reset” button (located in the bottom-right corner) to clear all previously programmed data if you’re programming the Orbit sprinkler timer for the first time.
  2. Twist the dial to “Time/Date” to set the date.

How do you turn off orbit sprinkler heads?

Turn the sprinkler off. Use a pull up tool to lift up the metal screw on the center of the nozzle. With the screw loose, the sleeve can be turned clockwise until it comes off. At the same time, turn the nozzle counterclockwise.

How do you adjust Hunter SRC sprinklers?

Turn the sprinkler off. Use a pull up tool to lift up the metal screw on the center of the nozzle. With the screw loose, the sleeve can be turned clockwise until it comes off. At the same time, turn the nozzle counterclockwise.

How do you troubleshoot a hunter thermostat?

If the thermostat is failing to activate the air conditioner or heating unit as desired, first be sure the selector switch is in the correct location. If you are still having problems, turn off power to the thermostat, remove its faceplate and confirm that the wires are connected to the proper terminals.

How do I override my hunter thermostat?

Step 4: Overriding the Program

Hold down one of the UP/DOWN arrow keys until the display flashes. Use the arrow keys to move the temperature setting to the desired temperature. Press the HOLD/RETURN button. The thermostat will now hold the temperature at the setting until the override is cancelled.

Should solenoid be on or off?

Avoid over-turning the solenoid in either direction, as this can cause damage to the components or cause pressurised water to escape the solenoid. When you hear water rush through the device, it’s easy to tell that the valve has opened successfully.

How do you adjust the flow control on a sprinkler valve?

Avoid over-turning the solenoid in either direction, as this can cause damage to the components or cause pressurised water to escape the solenoid. When you hear water rush through the device, it’s easy to tell that the valve has opened successfully.

Can you run 2 sprinkler zones at the same time?

Running multiple zones at once is usually not possible due water-pressure and flow limitations at residential properties. As with any standard irrigation controller, you can wire multiple solenoids/valves to the same zone output if you want.

How long do irrigation solenoids last?

Generally speaking, the life expectancy of a sprinkler system is about 20 years, on average. As for its components taken separately, good quality heads will last you anywhere between 10 to 15 years, while inexpensive ones will only be good for 2 or 3 years.

How do you clean a sprinkler solenoid?

Generally speaking, the life expectancy of a sprinkler system is about 20 years, on average. As for its components taken separately, good quality heads will last you anywhere between 10 to 15 years, while inexpensive ones will only be good for 2 or 3 years.

How do you open a solenoid valve manually?

Generally speaking, the life expectancy of a sprinkler system is about 20 years, on average. As for its components taken separately, good quality heads will last you anywhere between 10 to 15 years, while inexpensive ones will only be good for 2 or 3 years.

Should sprinkler valves be open or closed?

Make sure the sprinkler valve is closed, unless it’s the valve farthest from the main water source. You’ll want to leave this valve open and remove the sprinkler nozzle to allow air to escape when you turn on the water.

How do I find a buried solenoid valve?

Make sure the sprinkler valve is closed, unless it’s the valve farthest from the main water source. You’ll want to leave this valve open and remove the sprinkler nozzle to allow air to escape when you turn on the water.

How do you find a break in a sprinkler wire?

Make sure the sprinkler valve is closed, unless it’s the valve farthest from the main water source. You’ll want to leave this valve open and remove the sprinkler nozzle to allow air to escape when you turn on the water.

How often do sprinkler valves need to be replaced?

How long is the life expectancy of the average sprinkler system? This system can last up to 20 years, but you’ll likely experience minor breakdowns every 3-10 year, depending on how much you invest in the quality of your sprinkler system. You should also be sure to inspect your sprinkler system as least once a year.

How can you tell if your solenoid is bad?

Signs You Have a Problem

  1. The Water Won’t Shut Off. If you have this problem, it’s very likely the solenoid. …
  2. Low or Uneven Water Pressure. The solenoid controls the water pressure. …
  3. Water Leaks. There are many points in a sprinkler system that can leak. …
  4. Current Testing. …
  5. Valve Inspection. …
  6. Parts Replacement.

How do you test a bad sprinkler solenoid?

Signs You Have a Problem

  1. The Water Won’t Shut Off. If you have this problem, it’s very likely the solenoid. …
  2. Low or Uneven Water Pressure. The solenoid controls the water pressure. …
  3. Water Leaks. There are many points in a sprinkler system that can leak. …
  4. Current Testing. …
  5. Valve Inspection. …
  6. Parts Replacement.

How do I know if my sprinkler valve is stuck open?

Signs You Have a Problem

  1. The Water Won’t Shut Off. If you have this problem, it’s very likely the solenoid. …
  2. Low or Uneven Water Pressure. The solenoid controls the water pressure. …
  3. Water Leaks. There are many points in a sprinkler system that can leak. …
  4. Current Testing. …
  5. Valve Inspection. …
  6. Parts Replacement.

How do I know if my solenoid valve is working?

Signs You Have a Problem

  1. The Water Won’t Shut Off. If you have this problem, it’s very likely the solenoid. …
  2. Low or Uneven Water Pressure. The solenoid controls the water pressure. …
  3. Water Leaks. There are many points in a sprinkler system that can leak. …
  4. Current Testing. …
  5. Valve Inspection. …
  6. Parts Replacement.

What causes solenoids to fail?

Solenoid coil failure can be caused by a number of factors. Applying an incorrect voltage to the coil will cause it to fail and may cause the coil to burn out. Electrical surges or spikes may also damage the coil. Burnt out coils cannot be repaired and will need to be replaced.