How do I reset my Hunter irrigation controller?
How do I reset my Hunter controller?
- Unplug the controller’s transformer.
- Press and hold down the, and buttons.
- Plug the controller’s transformer back in.
- Release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.
How do I reprogram my Hunter X core sprinkler system?
How do I reset my Hunter controller?
- Unplug the controller’s transformer.
- Press and hold down the, and buttons.
- Plug the controller’s transformer back in.
- Release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.
How do I reset my irrigation system?
How to Reset a Sprinkler System
- Turn the control dial to the “off” position.
- Press the “next” button to access the clear-memory feature. …
- Press and hold the “off” button until the display stops blinking.
- Turn the control dial to the “run” position.
- Press and hold down the “minus” arrow and “prog” buttons simultaneously.
Why is my Hunter irrigation system not working? The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the “BYPASS” position (on an SRC, turn the dial into the RUN (Bypass Sensor position).
How do i reset my hunter x-core irrigation controller? – Related Asked Question
How do I reset my hunter x2 controller?
The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the “BYPASS” position (on an SRC, turn the dial into the RUN (Bypass Sensor position).
Where is the reset button on a Hunter thermostat?
Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.
How do you program a Hunter controller?
Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.
How do you program a hunter x2 controller?
Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.
How do I manually start my hunter sprinkler system?
Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.
How do you program a Hunter XC controller?
Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.
How do I reset my Rain Bird controller?
The current date and time will not be affected.
- Turn the dial to Seasonal Adjust.
- Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen.
- Turn the dial back to AUTO RUN. Your ESP-Me is now restored to the factory default settings.
How do you troubleshoot a sprinkler controller?
The current date and time will not be affected.
- Turn the dial to Seasonal Adjust.
- Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen.
- Turn the dial back to AUTO RUN. Your ESP-Me is now restored to the factory default settings.
How do you troubleshoot a hunter pro c controller?
Solution
- Make sure sensor is micro-switch type such as Mini-Clik®. Check that the jumper has been removed from the SEN terminals. Confirm proper operation (see “Testing the Weather Sensor”).
- Manual Single Station Mode will override the sensor. Use Manual All Station Mode to test sensor.
Why would sprinkler system not turn on?
When the sprinkler zones do not turn on at all, it is generally a problem with the electrical signals running from the controller to the valve solenoids. More rarely, it is caused by a faulty valve that needs to be rebuilt or replaced.
Why does my irrigation system finish watering and then start again?
A common reason why a program is repeating is that you have a second start time set. The start times control the exact time your ESP-Me timer will begin to water and they also control how many times a day your timer will water. The ESP-Me allows you to set up to 6 start times per program.
How do I reset my hunter heater?
To reset the heater: 1. Unplug the heater and wait 10 minutes for the unit to cool down. 2. After the 10 minutes, plug the unit in again and operate normally.
How do you troubleshoot a hunter thermostat?
If the thermostat is failing to activate the air conditioner or heating unit as desired, first be sure the selector switch is in the correct location. If you are still having problems, turn off power to the thermostat, remove its faceplate and confirm that the wires are connected to the proper terminals.
What does a flashing 4 mean on a Hunter thermostat?
4. Indicates if the fan is set to Auto or On modes. 5. Allows you to switch between Heat, Cool, and Off modes.
How do I turn on my Hunter XC sprinkler system?
X-Core – One Touch Manual Start and Advance
- Hold down the arrow (>,) button for 2 seconds. …
- This feature automatically defaults to program A. …
- The station number will be flashing. …
- Press the arrow (>,) button scroll to the station you wish to begin with.
How do you use a hunter sprinkler controller?
How to Program Your Hunter X-Core Sprinkler System
- Step 1: Set The Current Time. First, you will want to ensure that the current time is correct. …
- Step 2: Set the Start Times. Next, turn the dial to “Start Times”. …
- Step 3: Set the Run Time. …
- Step 4: Set the Watering Days. …
- Step 5: Test Coverage. …
- Step 6: Finished!
Is there an app for Hunter sprinkler system?
Hunter Hydrawise
Remote access is possible through either the Hydrawise app (iOS or Android compatible devices) or online through their cloud software. Key product features include: Predictive Watering Adjustments based on web-based weather data brings up to 50 percent in water savings.
How do I connect my hunter X2 to WIFI?
Hunter Hydrawise
Remote access is possible through either the Hydrawise app (iOS or Android compatible devices) or online through their cloud software. Key product features include: Predictive Watering Adjustments based on web-based weather data brings up to 50 percent in water savings.
How do I start my sprinkler system in the spring?
Hunter Hydrawise
Remote access is possible through either the Hydrawise app (iOS or Android compatible devices) or online through their cloud software. Key product features include: Predictive Watering Adjustments based on web-based weather data brings up to 50 percent in water savings.
How do I turn on my hunter sprinkler system after winter?
Steps to turn on sprinkler system after wintering
- Find system’s main shut-off valve. …
- Find the vacuum breaker. …
- Close the vacuum breaker test valves. …
- Open the vacuum breaker’s shut-off valves. …
- Reinstall main valve bleeder cap (as needed). …
- Slowly open the main valve. …
- Test the system. …
- Recheck the vacuum breaker and valves.
How do I reset my Rain Bird WiFi module?
Reset the WiFi module. While plugged in, press and hold the button on the WiFi module for 5 seconds. After this reset is complete it will be necessary to set up the WiFi module again in the Rain Bird App as if it was new.
How do you reprogram a Rainbird sprinkler system?
Rotate the dial to the “Watering start time” position and press the “+” or “-” keys to reprogram the time of day the watering cycle begins. Each zone will water in sequence starting at the time indicated. Programming multiple start times initiates the entire watering cycle again on the same day.
How can you tell if an irrigation controller is bad?
Sprinkler System Troubleshooting — 5 Signs Of A Faulty System
- Controller Isn’t Working Properly.
- Low or High Water Pressure.
- Sprinkler is Stuck or Won’t Come Up.
- Puddles on Lawn or Around Sprinkler.
- Uneven Spray Patterns.
- When to Call a Professional.
How long do sprinkler controllers last?
One of the components that you may need to replace regularly are the wires, often due to improper installation and corrosion. Valves will give you 10 to 15 years of service, while controllers 5 to 10 years.
How do you fix a sprinkler valve that won’t turn on?
One of the components that you may need to replace regularly are the wires, often due to improper installation and corrosion. Valves will give you 10 to 15 years of service, while controllers 5 to 10 years.
What does P err mean on a Hunter Pro C?
CAUSE – The “P ERR” message is displayed when the P/MV circuit is drawing too much current. Common causes include, a defective solenoid on the master valve, incompatible or defective pump relay, or wire run too long between the relay and controller.
What does err mean on sprinkler system?
CAUSE – The “P ERR” message is displayed when the P/MV circuit is drawing too much current. Common causes include, a defective solenoid on the master valve, incompatible or defective pump relay, or wire run too long between the relay and controller.
Why don’t my sprinklers turn off?
CAUSE – The “P ERR” message is displayed when the P/MV circuit is drawing too much current. Common causes include, a defective solenoid on the master valve, incompatible or defective pump relay, or wire run too long between the relay and controller.
How do I set the start time on my hunter sprinkler system?
CAUSE – The “P ERR” message is displayed when the P/MV circuit is drawing too much current. Common causes include, a defective solenoid on the master valve, incompatible or defective pump relay, or wire run too long between the relay and controller.
Why do my sprinklers keep running?
There are two reasons why your sprinklers would continue running: It is possible that your valves have been opened manually. You will need to locate your valve box(es) and twist the solenoid(s) on the valves clockwise until snug.